Serving Greater Pittsburgh, Cranberry Township, McKeesport, Bethel Park

Blog

Why Is Protecting Your Concrete Important

OK, we admit this isn’t the most exciting headline, so if you’ve read this far, we can probably guess that you are at least a bit curious about how and why to seal the various cracks and joints in your driveway, either random or controlled or both.

Why Is Protecting Your Concrete Important - Image 1

What’s a Crack? What’s a Joint?

Before we start, we need to address the above questions because your driveway likely has at least one of these, if not both. First, let’s talk about the cracks that are supposed to be there: control and expansion joints.

Why Is Protecting Your Concrete Important - Image 2

Control joints are deliberately placed into concrete slabs to “control” their inevitable cracking. That’s because, as concrete cures, it shrinks and cracks. So rather than having cracks appear randomly, which would look pretty shabby, control joints allow the concrete to crack in a straight, ordered manner. For a driveway, this is most often done by using a trowel to make shallow grooves into the new concrete while it is still wet or with a concrete saw right after it sets. When the concrete cracks, it follows these predetermined lines, leaving your driveway slabs looking neat and ordered.

Expansion joints are wide joints that connect the driveway to the garage at the top and to the street at the bottom. As their name suggests, these exist to allow for the natural expansion of your driveway’s slabs during hot months as the street in front of your home expands and pushes them. However, contractors often fill them with inferior materials that don’t offer much “give.”

Cracks are just that — random breaks in the concrete that have occurred over time due to uneven slab settlement or other stresses. But like control joints, they open a path for water to seep beneath the slab, which can cause the soil underneath to soften and wash away over time. This can, in turn, cause the heavy concrete slabs to sink.

Why Is Protecting Your Concrete Important - Image 3

Stop Water Seepage

Preventing moisture from seeping under your concrete is the primary reason for sealing your driveway’s control joints. As mentioned above, when water seeps beneath your concrete slabs, it can cause the soil beneath it to soften and compress. In some cases, it can even wash away the soil, leaving empty spaces underneath. When the soil compresses or these voids appear, it can allow the heavy concrete above to sink. And as this often happens unevenly, with one part of the slab sinking faster than another, this added stress can cause uncontrolled cracking, eventually resulting in a driveway that’s uneven and unattractive. Not only does this lower your home’s curb appeal and potentially its value, but it can also present a tripping hazard that can be a liability for the homeowner.

 

Why Is Protecting Your Concrete Important - Image 4

Preventing Street Expansion

In addition to water seepage issues, there is a phenomenon known as “street creep” that can put pressure on your home’s foundation, causing severe problems down the road.

As you probably know, as materials heat and cool, they expand and contract. Concrete is not immune to this, so it’s easy to imagine this scenario: As the concrete slabs in the street in front of your home cool with the weather, they contract. This causes the joints between them to expand. These joints then become filled with grit, sand, pebbles and other incompressible materials.

Fast forward to the hot summer months. The warm weather now causes those street slabs to expand — only they can’t expand back into the joints because they are now full of grit, sand, etc. So, without empty joints to allow for expansion, the entire street expands outward, slowly pushing up your driveway and into your home’s foundation. Scary stuff indeed!

Simple Solutions

Fortunately, there are solutions to all these issues. Sealing your driveway’s control joints with a flexible material like NexusPro® prevents water from seeping beneath the slabs and affecting the soil beneath your concrete. The sealant also prevents contamination by pebbles, grit, etc. from entering the joints which can prevent the joint from performing as intended.

Why Is Protecting Your Concrete Important - Image 5

It should be mentioned that silicone-based sealants like NexusPro are far superior to cheaper polyurethane-based sealers because they won’t dry and crack over time due to UV exposure.

If you’re concerned about driveway slab settlement, call us for a free, no-obligation inspection. We can provide a simple, inexpensive solution that’ll keep your home’s concrete looking good (and its foundation safe) for many years to come. 

our service area

We serve the following areas

Our Locations:

Keystone Basement Systems
205 31st St
McKeesport, PA 15132
1-412-872-2550
Top
Service Area
Free Quote